Chinasky Electronics Co., Ltd Company Logo Chinasky Electronics Co., Ltd
5 1

1CH Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T)

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price
You may also be intersted in
active balun receivertransceiver

Contact us

Chinasky Electronics Co., Ltd
[China]

Address
6th Floor, Building No.10, New World Business Center Xiacheng District, Hangzhou 310022, China Hangzhou Zhejiang
Phone
86-1575710-6200
Contact name
Candice Tang

Quick Information

  • Brand Name: Chinasky
  • Place of Origin: China
  • Model Number : VB302T
  • Video Format : NTSC, PAL, and Secam
  • Frequency Response : DC to 8MHz
  • Attenuation : 0.5db Typ
  • Cmrr : 60 Db

Description

1ch Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T)
 
Description:
The VB302T active UTP video Transmitter converts the unbalanced signal into balanced signal and transmits the signal after pre-raise. Receiver receives balanced signal to convert it into unbalanced signal and restores the received signal with one channel of audio transmission function and two channels of data (or standby interface) with perfect receiving effect, which can be applied in the occasions such as video monitoring and video meeting, simplify the wiring project and save wire use quantity.
 
Features:
1.      Adopt differential signal transmission with excellent anti-jamming ability
2.      Save project wire expenses, each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal
3.      The farthest transmission distance can reach 2400m if it is used with active receiver
4.      Outstanding interference rejection, transient protection
5.      Aluminum alloy case
 
Technical specifications:

1ch Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T)
Video Format NTSC, PAL, and SECAM 
Frequency Response DC to 8MHz
Attenuation 0.5dB typ
CMRR 60 dB 
Impedance Coax, Male BNC 75 ohms 
RJ45/Terminal Block 100 ohms
Working environment Working Temperature -10ºC to +70ºC
 Storage Temperature -30ºC to +70ºC
Humidity  0 to 95%
Wire Type UTP5
Connector Female BNC, RJ45 and Terminal Block
Power 12VDC (Max:90mA)
Case Aluminum alloy case
Dimension 105mm*70mm*29mm
Weight  185g/pc
Type of the required wire:
Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.)
Characteristic impedance:100Ω±20Ω
DC loop resistance: 18Ω/100m
Differential capacitance: 62pf/m (maximum)
 
Connection method:
Connect the two-color wires of a pair of Cat-5 unshielded twisted pair wire to the '+' terminal of the green socket and connect the single-color wires to the '-' terminal of the green socket. Connect the BNC interface of the transmitter to the BNC interface of the camera. If there is any joint in the circuit, please adopt welding method or special junction box to ensure perfect contact at the joint. Please be sure to connect the interface marked with '' symbol to the ground wire of the lighting-proof system with the copper conductor with sectional area≥1.5 mm2!
 
The clamping order of the modular plug is shown as follows:

Adjusting method:
Adjust and slide the switch according to the distance. The switch can be slid to the lowest level when the distance is between 1400m and 1700m, the switch can be slid to the middle level when the distance is between 1700m and 2000m and the switch can be slid to the highest level when the distance is more than 2000m (as shown in following figure). This data is the test result of our company with standard unshielded Cat-5 twisted pair wire and it can be applied flexibly according to the actual wire situation in the practical application.

 
Frequently Asked Questions
Why does my video look like a scrambled Cable TV signal?
This typically indicates reversed polarity.
Can shielded twisted pair be used?
Some customers have successfully used shielded wire up to a few hundred feet. However we does not recommend it. Its high-frequency roll-off will severely degrade the distance performance.
Can Category 6 wire be used?
Yes. Unshielded Twisted Pair wire, Category 5 or better, can be used with UTP video transceiver.
Can I transmit more than one video signal in a multi-pair wire bundle?
Yes. One of the benefits of using UTP video transceivers is interference rejection. UTP video signals can reside in the same wire bundle as multiple video signals, ringing telephones, Ethernet, low voltage power, RS-422, RS-485, etc.
Application Diagram


Certificates

  • CE : BST1504415210002Y1ER1

Price

  • Price Condition : FOB
  • Delivery Port : shanghai

Packaging & Delivery

  • Packing :2 pieces per pair
  • Supply Ability : 100000 PCS Per Year

Product Image

  • 1CH Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T) image

Other products from this supplier

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Candice Tang
Chinasky Electronics Co., Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Security & Protection Products
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.
Chat Online with$Chinasky Electronics Co., Ltd.
Click the "S Chat" Icon on the right-hand to contact Chinasky Electronics Co., Ltd.
Note: Please ensure you have installed Skype program in your computer.
           If you don't have yet, click here to download Skype.

Close Window